AOMAG® Neodymium Block Magnet 50 X 25 X 10mm Magnets DIY MRO

Product ID (upc): 602752732323

• Neodymium Block Magnet 50 X 25 X 10mm ( 1.97inch length * 0.98inch Width * 0.4inch Thickness ) N52 Magnets DIY MRO New Description: Shape: Block Material: Nd, Fe, B Grade: N52 Plating: Ni-Cu-Ni (Nickel) Color: Silver Quantity: 1pcs Size: 50 x 25 x10mm (L*W*H) Max Temp (degrees C): 80 Note: Be careful Fragile and chip hand, Placed in a dry place, stored at room temperature! This is a seriously powerful magnet and it is totally unsuitable for children! Package Included: 1 x Block Magnet
• Surface: Ni-Cu-Ni plated . Magnetizing direction: axial. Working temperature:80℃.
• Material:N52 neodymium magnet (Nd2Fe14B)
• Grade N52 is the highest grade (the most powerful magnet) that human tec. can reach so far. We at aomagnet guaranty that every piece of magnet we supply is in accordance with TS16949 and ISO14001.
• Quantity: 1 Block Ndfeb magnet ( by www.aomagnet.com ) per package

Neodymium Block Magnet 50 X 25 X 10mm N52 Magnets DIY MRO New Description: Shape: Block Material: Nd, Fe, B Grade: N52 Plating: Ni-Cu-Ni (Nickel) Color: Silver Quantity: 1pcs Size: 50 x 25 x10mm (L*W*H) Max Temp (degrees C): 80 Note: Be careful Fragile and chip hand, Placed in a dry place, stored at room temperature! This is a seriously powerful magnet and it is totally unsuitable for children! Package Included: 1 x Block Magnet
Safety Warning:
All the magnets must be used with great care to avoid damages and personal body injuries.
It's not a TOY! Make sure keep the magnets are out of reach children and pets, as small magnets will pose a choking hazard.
Watch your fingers, as they are very strong magnets, which are difficult to pull apart and fly together quickly from far away,so it is very easy to pinch fingers between attracting poles.
keep the magnets far way from medical devices, electronic products,and magnetic media, as our magnets have strong magnetic fields which may affect and/or disrupt the functioning of these medical devices,electronic products,and magnetic media.
Magnets are not to be cut, drilled, sawed, or machined in any way unless done so by an experienced professional.
magnets are fragile, they can crack, chip, or shatter if allowed to slam against each other. so make sure handle with care, eye protection glasses should be worn when handling magnets, due to launching of small magnetic pieces at high speeds if shattering occurs.